Belt conveyor belt skid solution

1. Heavy hammer tension belt conveyor belt slip The belt conveyor of the weight tension device can be added to solve the problem when the belt slips. It can be added to the belt without slipping. However, it should not be added excessively so as not to subject the belt to unnecessary excessive tension and reduce the service life of the belt.
2. Spiral Tensioning or Hydraulic Tensioning Slipping of a Belt Belt Tension can be increased by adjusting the tension stroke when a belt tensioner or hydraulically tensioned belt conveyor slips. However, sometimes the tensioning stroke is not enough and the belt is permanently deformed. At this time, the belt can be cut off and re-cured.
3. The use of nylon belt or EP requires a long tensioning stroke. When the stroke is not enough, it can be re-vulcanized or the tensioning stroke can be increased to solve the problem.
phone

Elevator Component

product

1. Elevator Component , Small Vibration SB-JR Series Motors
2. Permanent Magnet DC Door Motors , Elevator Component
3. Elevator Component , Door Motors For Door Machine Of Lift
4. Elevator Component , Square Oil Can For The Top Of Elevator Cabin
5. Round Type Oil Can , Elevator Component For Guide Rail

Elevator Component

1. Elevator Rope Gripper
2. Lift Safety Brake
3. Elevator Safety Parts
4. Motor for door machine of elevator / lift

Elevator Gearless Motor

As the drive motors of escalators, motors have the advantages of attractive appearance, compact structure, low noise and small vibration.

Gearless Motor, Elevator Gearless Motor, Gearless Elevator Motor, Gearless Motor For Elevator, Hoisting Machine, Elevator Geared Motor

Ningbo Xinda Elevator Traction Technology Co., Ltd. , https://www.xinda-elevator.com