Anti-static raised floor design points
1. The fireproof rating of the anti-static raised floor shall comply with the requirements of the “Code for Fire Protection of Interior Decoration Design of Buildingsâ€.
2. The height of the anti-static raised floor should be determined according to the requirements of use.
(1) For wiring only: The basic size is 250mm.
(2) For the supply line and air conditioning wind storage: the basic size is 400mm. The floor's detachable panels are interchangeable and have a high precision of production to ensure the floor space is required for the air conditioning plenum.
3, anti-static machine room activity floor paving construction is the final stage of building renovation. The indoor ceiling panel should be laid. After the ceiling lamps and vents are installed, clean the floor and paving the raised floor (the insulation cotton and the trunking should be laid before the insulation cotton and the trunking).
4. The anti-static machine room movable floor is laid on the leveled cement mortar cushion. In order to reduce the height of the ground practice, when the structure is directly laid on the structural floor, the structural floor requires a smooth surface and sprays the interface agent to solidify the concrete surface to make the ground. Can't afford sand.
5, the surface of the floor should be soft, not slippery, wear-resistant, pollution-resistant.
6. After the floor is installed, it must be grounded, otherwise it will not be anti-static.
S-type load cells, also referred to as S-beam load cells, are force sensors specially designed to accurately measure both tension and compression. The name "S-type" is derived from their distinctive S-shape. Some users prefer to call them "Z-type," referring to their structured centre beam spring element.
The S-type load cells we offer vary in capacities, ranging from a nimble 25kg up to an impressive 30 tonnes. These units utilize advanced metal foil strain gauge technology. Their notable accuracy and compact design attributes make them a top choice for applications requiring precise force measurements. With easy and versatile installation using rod ends or load buttons, S-type load cells deliver outstanding performance for tension and compression applications alike.
Our range of S-type load cells is available in both low and high-capacity options. They are primarily designed to measure tensile forces but are equally competent in measuring compressive forces.
Built from stainless steel or aluminum alloy, depending on the range size, these sensors offer measurements from as light as 200g up to a hefty 1T. Their high precision, easy installation, and reliable stability are just some of their numerous advantages. With such robust features, they are a perfect fit for applications such as dosage scales, packaging scales, hook scales, and technical control equipment. Through precise force measurement, they enhance the reliability of these devices, helping to optimize operations and product quality.
Standard Load Cells,S-Type Load Cells,S-Beam Load Cells,Z Type Load Cells
Zhejiang Nanhua Electronic Technology Co., Ltd , https://www.nhloadcell.com