Home>Bearing knowledge>Dissecting the importance of NSK bearing equipment and protection

/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Analyze the importance of NSK bearing equipment and protection

---

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

Bearings are attributed to fine parts; therefore, the demand is quite stable when used; that is, the use of high-performance bearings; if improperly applied; can not reach the expected function; and simply make the bearings damaged. Therefore; the use of bearings should pay attention to The following matters:
First, adhere to the NSK bearing and its surrounding environment, even if the invisible shallow dust enters the bearing; it will also add bearing wear; oscillation and noise.
Second, the use of equipment should be careful not to allow strong stamping; does not allow the hammer to directly hit the bearing; does not allow the pressure to pass through the rolling body.
Third, the use of appropriate and accurate equipment to try to use special things; try to avoid the use of cloth and short fibers and the like.
Fourth, to avoid the corrosion of the bearing directly when taking the bearing by hand; to wash away the sweat on the hand; and apply high-quality mineral oil before operation; especially in the dry season and summer to pay attention to rust.
However, under certain special operating conditions; the bearing can obtain a better life than the traditional accounting; especially in the case of light loads. These special operating conditions are; when the rolling surface (track and tumbler) is smoothed The oil film effectively separates and confines the external damage that can be caused by contaminants. In fact; under ambition; the so-called Eternal bearing life is achievable.
Grease smoothing has a sealing method in which a sealed grease is prefilled with a smooth grease; and a smooth grease is filled inside the outer casing; a filling and fat filling method is made up or replaced at intervals; in addition, a machine having a smooth bearing demand for a plurality of bearings It also uses the method of collecting and supplying grease to the smooth parts of the pipeline. The grease is smooth and can be filled for a long time without filling up the smooth grease; and the layout of the sealing equipment is also simple; therefore, it is widely used. Said to be relatively simple. Often smooth can greatly improve the life of NSK bearings

---

Recommend to friends comments close window

Bearing related knowledge

Bearing device and disassembly method Bearing layout method Rolling bearing heating device Specific analysis of China's bearing grinding machine stepper motor and its control system failure analysis Protection car universal joint cross shaft needle bearing tips

This article links to http://
Please indicate China Bearing Network http://

Previous:How to correctly install the slewing bearing Next: Bearing system

Self Adhesive Standard Floor Protection

Moving Floor Protection,Floor Protection Paint,Self Adhesive Floor Protection,Outdoor Floor Protection

Suzhou Surface Protective New Material Technology Co.,Ltd , https://www.surfaceprotective.com